Prevest Platina Hi-Gloss
Platina Hi-Gloss is a water-soluble aluminum oxide paste designed for the final polishing of anterior and posterior composite restorations and veneers. It contains potassium nitrate to provide a desensitizing effect, ensuring patient comfort. The paste enhances the smoothness of microfilm composites, achieving a high-luster finish, and pre-polishes hybrid and micro-hybrid composites for a smooth, low-luster surface. For hybrid composites, follow-up polishing with Platina Hi-Gloss results in a final, high-shine finish.
Contact us for sales assistance from our Biomedical Engineer.
Features:
- Non-splatter, non-drying formula
- Spearmint flavor
- Contains potassium nitrate for desensitizing
Indications:
- Final polishing of direct and indirect composite restorations and veneers.
| Technical Specification | Technical Data :
Composition :
Storage Conditions :
Shelf Life: 3 years from the date of manufacturing. Country of Origin: India Manufacturer: Prevest Denpro |
|---|
- 1 x Syringe 4gm
1. Place composite restoration as per standard techniques. Complete gross reduction of excess and general outline form of the restoration using carbide finishing burs or diamond finishing instruments. Additional finishing and polishing is obtained by use of Enhance Discs, Cups or points. Alternatively, other standard aluminum oxide disc series may be used (see complete directions of finishing instruments). Prior to proceeding to polishing with Platina Hi-Gloss Composite Polishing Pastes, the restoration should be finished to a final contour. Surface should be smooth and defect free.
2. Attach a enhance Foam Polishing Cup to the provided mandrel by inserting the bayonet end of the mandrel into the opening on the narrow end of the cup. Rotating the mandrel ¼ turn makes insertion easier. Make sure the mandrel inserts fully into the cup. Insert the mandrel into a conventional speed contra-angled hand piece.
3. Dispense a portion of Platina Hi-Gloss Polishing Paste onto a clean paper pad or dappen dish. Recap syringe promptly.
4. Apply a small amount of Platina Hi-Gloss Polishing Paste to the surface of the enhance Cup. Without running the hand piece apply material to the surface to be polished. Running slowly at first, using overlapping, continuous circular motions, work the surface of the restoration, dry initially, up to moderate speed and pressure, use flat end and corner edge of cup.
5. To increase surface luster, add water in small amounts (i.e drop wise) to dilute the paste using a light circular buffing action. Repeat as needed to produce a smooth surface.
6. Rinse Platina Hi-Gloss from the tooth surface and enhance Cup. This is the final
step for microfilled composites. Continue with the next step for hybrid and microhybrid composite materials.
7. Dispense and apply Platina Hi-Gloss Extra Fine Paste to the Enhance Cup as described in steps 3 and 4 and polish the surfaces dry at first, then adding increasing amounts of water for 15-30 seconds at higher speed, with a lighter buffing pressure for final luster. The Enhance Cup should be discarded after use.
8. Clean excess material from oral surfaces with air/water spray and/ or instruct patient to rinse and expectorate.
