Voco Ionolux Glass Ionomer Restorative Cement
Voco Ionolux Glass Ionomer Restorative Cement is a resin-reinforced, light-curing material that combines aesthetics, ease of use, and clinical effectiveness. It requires no tooth conditioning, offers adjustable working time, and simplifies dental procedures with its non-sticky, easy-to-model properties. Ideal for various restorations, it promotes oral health through fluoride release and ensures diagnostic clarity with its radiopacity.
As low as
₹4,195.00
In stock
Only %1 left
SKU
SBVO08115
Price:
4,195.00
(Inclusive of Taxable Goods)
Voco Ionolux Glass Ionomer Restorative Cement is available to buy in increments of 1
Contact us for sales assistance from our Biomedical Engineer.
Features:
- Easy to apply and can be modeled immediately
- Non-sticky to instruments
- No need to condition tooth surfaces before filling placement
- No varnish required
- Ideal for the Sandwich technique
- Remains stable in the cavity
- Easy, direct, and bubble-free application
Indications:
- Class III and V restorations, especially cervical fillings and root caries
- Fillings on deciduous teeth
- Small Class I fillings
- Temporary fillings
- Core build-up
- Lining
| Technical Specification |
|
|---|
Voco Ionolux Glass Ionomer Restorative Cement A2
- 1 x Powder / liquid (12 g / 5 ml) A2
- 1 x Accessories
Voco Ionolux Glass Ionomer Restorative Cement A3
- 1 x Powder / liquid (12 g / 5 ml) A3
- 1 x Accessories
Preparation:
- Prepare minimally invasive cavities, preserving healthy tooth substance, without the need for undercuts.
- Ensure Class V cavities have a minimum depth of 1 mm.
- Remove preparation residues with water spray, then dry with air, leaving the surface slightly glossy.
- Place a matrix if needed.
- If residual dentine thickness is insufficient, cover the area near the pulp with calcium hydroxide.
Shade Selection:
- Use a VITA shade guide on a moist tooth to select the appropriate shade.
Mixing:
- Shake the powder and liquid bottles for at least 3 seconds before dispensing.
- Dispense a level spoonful of powder onto a mixing pad and close the bottle immediately to prevent moisture exposure.
- Add 2 drops of liquid per level scoop of powder (powder/liquid ratio 3.2:1 g/g).
- Mix using solid plastic or abrasion-proof spatulas until a homogeneous consistency is achieved.
- Process the cement at room temperature (15°C - 23°C).
Application:
- Apply the mixed Ionolux into the cavity with a suitable instrument and contour it.
- Light-cure with a polymerization lamp.
- For fillings over 2 mm thick, apply and light-cure in layers.
Light-Curing:
- Use polymerization lamps with an output of at least 500 mW/cm².
- Cure each layer for 20 seconds.
- Keep the lamp tip close to the filling surface; curing depth decreases if the distance exceeds 5 mm.
Finishing:
- After light-curing, remove excess material.
- Finish and polish the filling as usual.
Warnings and Precautions:
- If the material contacts oral mucosa or skin, use an alcohol-soaked cotton swab, then rinse with water.
- In case of eye contact, rinse thoroughly with water and consult an ophthalmologist.
- Avoid using phenolic substances, particularly those containing eugenol or thymol, with Ionolux.
- Ensure products are suitable for their intended purpose.
Storage:
- Store between 4°C - 23°C.
- Close both powder and liquid containers tightly after use.
- Store in a dry, light-protected area.
Disposal:
- Dispose of the product in accordance with local regulations.
